Using The Stack Bypass While Reserving Print Jobs - Canon imageRunner 6020 Reference Manual Reference Manual

All in one printer
Hide thumbs Also See for imageRunner 6020:
Table of Contents

Advertisement

Using the Stack Bypass while Reserving Print Jobs

While paper is being fed from the stack bypass for the current print job, you can
specify the paper to be loaded in the stack bypass for the next reserved job.
You can reserve up to five print jobs, including the current job. Interrupt print jobs
are not included in this count.
The following example assumes that 11" x 17" plain paper is being fed from the
stack bypass for the current job, and that you are reserving LTR plain paper to be
fed from the stack bypass for the next reserved job.
IMPORTANT
If Stack Bypass Standard Settings is set to 'On', you can reserve a job only with the
registered paper types. (See "Setting the Standard Paper for the Stack Bypass," on p. 3-
35.)
1
Place your originals © set the desired print settings.
2
Press [Paper Select] © [Stack Bypass Settings].
When there is no reserved print job, you can designate the paper size by pulling
it out of the stack bypass, and reinserting it.
Making Prints Using the Stack Bypass
1
1-69

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Imagerunner 6020iImagerunner 5020Imagerunner 5020i

Table of Contents