4
4
5
4-96
Setting MEAP Settings (MEAP Settings)
Press [Yes].
To cancel printing, press [No].
The information of the installed applications is printed.
Items printed for each application are as follows:
•
Application Name: Prints the name of the application.
•
Application ID/System Application Name: Prints the file name for a system
application. Prints the application ID for a common application.
•
Application Version: Prints the version name of an application.
•
Status: Prints the status of the application.
- Installed: The application has been installed.
- Active: The application is running.
- Stopped: The application is in a non-operative state.
•
Installed on: Prints the date and time the application is installed.
•
Vender: Prints the name of the application vendor.
•
License Status: Prints the license status.
- None: License is not necessary.
- Not Installed: License is necessary but has been disabled.
- Installed: An effective license has been installed.
- Invalid: License is invalid.
- Overlimit: Installed license has exceeded its limit.
•
License Expires After: Prints the expiration date of the application. If License
Status is 'None', it is not printed.
•
License Upper Limit: Prints upper limit for each counter. If License Status is
'None', it is not printed.
•
Counter Value: Prints the current value for each counter. If License Status is
'None', it is not printed.
•
Maximum Memory Usage: Prints the maximum memory usage of the
applications. The unit of the printed number is KByte.
•
Registered Service: Prints the service registered on MEAP framework from the
application. Registered Service is printed only if there is data to correspond.
Press [Done] repeatedly until the Basic Features screen
appears.