Canon imageRunner 6020 Reference Manual Reference Manual page 164

2
3
3
4
3-20 Setting Specifications That Are Common to Each Function (Common Settings)
Press [w] or [v] until [Energy Saver Mode] appears © press
[Energy Saver Mode].
Select [–10%], [–25%], [–50%], or [None] © press [OK].
The approximate energy saving figures for each mode, and the approximate
delay times from power ON to Ready to Print status are listed below.
•
–10%: 10% less power (approximately 50 seconds)
•
–25%: 25% less power (approximately 90 seconds)
•
–50%: 50% less power (approximately 180 seconds)
•
None: 2% less power (approximately 0 seconds)
•
The figures in parentheses ( ) show the approximate time it takes for the
machine to return to the Ready to Print status.
The selected mode is set.
Press [Done] repeatedly until the Basic Features screen
appears.