Canon imageRunner 6020 Reference Manual Reference Manual page 186

3
3
4
3-42 Setting Specifications That Are Common to Each Function (Common Settings)
Press [On] © select a desired language.
If the desired language is not displayed, press [w] or [v].
Press [Off], if you do not want to change the display language.
Press [OK].
The selected mode is set, and the display returns to the Basic Features screen.
NOTE
•
If Language Switch is set to 'On', some characters are restricted and cannot be
entered. To enable all characters, perform the following steps.
- On the Language Switch Screen Display, select [Off] © press [OK]
•
Even if Language Switch is set to 'On', there are some languages that cannot be
displayed.