Canon imageRunner 6020 Reference Manual Reference Manual page 97

2
Adjust the slide guides to match the size of the paper.
If you are feeding large size paper, pull out the auxiliary tray.
3
Load the paper into the stack bypass.
Make sure that the height of the paper stack does not exceed the limit mark
( ).
Align the required number of sheets of paper with the slide guides. The surface
that you want to print on must be placed face up. Insert the paper into the
machine until it stops.
IMPORTANT
If Stack Bypass Standard Settings is set to 'On', you can load only the registered
paper types into the stack bypass.
Slide Guide
Auxiliary Tray
Making Prints Using the Stack Bypass
1
1-65