Setting The Standard Local Print Settings - Canon imageRunner 6020 Reference Manual Reference Manual

Setting the Standard Local Print Settings

If you want to print documents from an inbox without changing the original settings
set when they were scanned, or if you want to print documents sent from a personal
computer after changing the print settings, you can print using the Standard Local
Print Settings set in this section. The machine also prints using the Standard Local
Print Settings when you merge multiple documents. (An asterisk (*) indicates the
default setting.)
•
Paper Select (Paper Source)
• Copies
•
Finisher
- With the Finisher:
Do not Collate/Collate/Offset Collate*/Group/Offset Group/Staple (Corner
(Top Left/Bottom Left/Top Right/Bottom Right), Double (Left/Right))
- With the Finisher and Puncher Unit-B1:
Do not Collate/Collate/Offset Collate*/Group/Offset Group/Staple (Corner
(Top Left/Bottom Left/Top Right/Bottom Right), Double (Left/Right))/Hole
Punch
- With the Copy Tray-C3:
Do not Collate/Collate*/Group/Rotate Collating/Rotate Grouping
• Two-sided Print (On/Off*)
•
Erase Document After Printing (On/Off*)
•
Merge Documents (On/Off*)
NOTE
The default settings are:
- Paper Select: 'Auto'
- Copies: '1'
- Finisher: 'Offset Collate (with the Finisher)', 'Collate (with the Copy Tray-C3)'
- Two-sided Print: 'Off'
- Erase Document After Printing: 'Off'
- Merge Documents: 'Off'
1
Press
Setting Specifications That Are Common to Each Function (Common Settings)
(Additional Functions) © [Common Settings].
3
3-39