Canon imageRunner 6020 Reference Manual Reference Manual page 153

2
Select [Copy], [Send], [Mail Box], or [MEAP] © press [OK].
When the main power is turned ON, or after Auto Clear initiates:
If you select [Copy]: The Copy Basic Features screen appears.
If you select [Send]: The Send Basic Features screen appears.
If you select [Mail Box]: The Inbox Selection screen appears.
If you select [MEAP]: The MEAP application screen appears. (If no MEAP
application is installed, a message telling you that there is no MEAP application
installed appears.)
[Send] is only displayed if you are using the imageRUNNER 6020i/5020i.
q If you want to set the System Monitor screen as the initial screen:
❑
Select [On] for <Set [System Monitor] as the Initial Function> © press [OK].
The System Monitor screen appears when the main power is turned ON, or
after Auto Clear initiates.
The selected mode is set.
NOTE
If you do not want to set the Device status screen as the default screen when you
press [System Monitor], press [Off] under <Set [Device] as the default screen for
[System Monitor]> © press [OK]. If you select [Off], the Copy Job Status screen is
set as the default screen.
3
Press [Done] repeatedly until the Basic Features screen
appears.
Setting Specifications That Are Common to Each Function (Common Settings)
3
3-9