Cisco 7965G Administration Manual page 67

Chapter 3 Setting Up the Cisco Unified IP Phone
When the phone successfully completes the installation procedure, it displays "Success." If the phone
displays, "Failure," the authorization string may be incorrect or the phone may not enabled for
upgrading. Refer to error messages generated by the CAPF and take appropriate actions.
You can verify that an LSC is installed on the phone by choosing Settings > Model Information and
ensuring that the LSC setting shows Installed.
Related Topic
• Understanding Security Features for Cisco Unified IP Phones, page 1-9
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.0
OL-12650-01
Configuring Security on the Cisco Unified IP Phone
3-15