Power Outage; Obtaining Additional Information About Power; Understanding Phone Configuration Files - Cisco 7965G Administration Manual

Chapter 2 Preparing to Install the Cisco Unified IP Phone on Your Network

Power Outage

Your accessibility to emergency service through the phone is dependent on the phone being powered. If
there is an interruption in the power supply, Service and Emergency Calling Service dialing will not
function until power is restored. In the case of a power failure or disruption, you may need to reset or
reconfigure equipment before using the Service or Emergency Calling Service dialing.

Obtaining Additional Information about Power

For related information about power, refer to the documents shown in
provide information about these topics:
•
•
•
Table 2-3
Document Topics
Cisco Unified IP Phone Power Injector http://http://www.cisco.com/en/US/pr
PoE Solutions
Cisco Catalyst Switches
Integrated Service Routers
Cisco IOS Software

Understanding Phone Configuration Files

Configuration files for a phone are stored on the TFTP server and define parameters for connecting to
Cisco Unified Communications Manager. In general, any time you make a change in Cisco
Unified Communications Manager that requires the phone to be reset, a change is made to the phone's
configuration file automatically.
Configuration files also contain information about which image load the phone should be running. If this
image load differs from the one that is currently loaded on a phone, the phone contacts the TFTP server
to request the required load files. (These files are digitally signed to ensure the authenticity of the file
source.)
In addition, if the device security mode in the configuration file is set to Authenticated and the CTL file
on the phone has a valid certificate for Cisco Unified Communications Manager, the phone establishes
a TLS connection to Cisco Unified Communications Manager. Otherwise, the phone establishes a TCP
OL-12650-01
Cisco switches that work with the Cisco Unified IP Phone 7965G and 7945G
The Cisco IOS releases that support bidirectional power negotiation
Other requirements and restrictions regarding power
Related Documentation for Power
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.0
URL
oducts/ps6951/index.html
http://www.cisco.com/en/US/netsol/
ns340/ns394/ns147/ns412/networking
_solutions_package.html
http://www.cisco.com/univercd/cc/td/
doc/product/lan/index.htm
http://www.cisco.com/en/US/products
/hw/routers/index.html
http://www.cisco.com/en/US/products
/sw/iosswrel/products_ios_cisco_ios_
software_category_home.html
Understanding Phone Configuration Files
Table 2-3. These documents
2-5