Cisco 7965G Administration Manual page 38

Overview of Configuring and Installing Cisco Unified IP Phones
Table 1-7 Checklist for Installing the Cisco Unified IP Phone 7965G and 7945G (continued)
Task
4. Monitor the phone startup process.
5. Configure these network settings on
the phone by choosing Settings >
Network Configuration.
To enable DHCP:
• Set DHCP Enabled to Yes
• To use an alternate TFTP server, set
Alternate TFTP Server to Yes
Enter IP address for TFTP Server 1
To disable DHCP:
• Set DHCP Enabled to No
• Enter static IP address for phone
• Enter subnet mask
• Enter default router IP addresses
Enter domain name where phone
•
resides
• Set Alternate TFTP Server to Yes
Enter IP address for TFTP Server 1
6. Set up security on the phone.
7. Make calls with the Cisco Unified IP
Phone.
8. Provide information to end users about
how to use their phones and how to
configure their phone options.
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.0
1-24
Purpose
Verifies that phone is
configured properly.
Using DHCP—The IP address
is automatically assigned and
the Cisco Unified IP Phone is
directed to a TFTP Server.
Consult with the
Note
network administrator
if you need to assign
an alternative TFTP
server instead of using
the TFTP server
assigned by DHCP.
Without DHCP—You must
configure the IP address,
TFTP server, subnet mask,
domain name, and default
router locally on the phone.
Provides protection against
data tampering threats and
identity theft of phones.
Verifies that the phone and
features work correctly.
Ensures that users have
adequate information to
successfully use their Cisco
Unified IP Phones.
Chapter 1 An Overview of the Cisco Unified IP Phone
For More Information
See the "Verifying the
Phone Startup Process"
section on page 3-12.
See the "Configuring
Startup Network Settings"
section on page 3-13.
See the "Network
Configuration Menu"
section on page 4-5.
See the "Configuring
Security on the Cisco
Unified IP Phone" section
on page 3-13.
Refer to Refer to Cisco
Unified IP Phone 7965G
and 7945G for Cisco
Unified Communications
Manager 6.0 (SCCP and
SIP).
See Appendix A,
"Providing Information to
Users Via a Website."
OL-12650-01