Cisco 7965G Administration Manual page 59

Chapter 3 Setting Up the Cisco Unified IP Phone
Procedure
4. Connect a straight-through
Ethernet cable from the
switch to the 10/100/1000
SW port.
5. Connect a straight-through
Ethernet cable from another
network device, such as a
desktop computer, to the
10/100/1000 PC port.
Figure 3-1 Cisco Unified IP Phone 7965G and 7945G Rear Cable Connections
2
OL-12650-01
Notes
Each Cisco Unified IP Phone
ships with one Ethernet cable in
the box.
You can use either Category
3/5/5e/6 cabling for 10 Mbps
connections, but you must use
Category 5/5e/6 for 100 Mbps
connections and Category 5e/6
for 1000 Mbps connections.
Optional. You can connect
another network device later if
you do not connect one now.
You can use either Category
3/5/5e/6 cabling for 10 Mbps
connections, but you must use
Category 5/5e/6 for 100 Mbps
connections and Category 5e/6
for 1000 Mbps connections.
1
AUX 10/100/1000 SW 10/100/1000 PC
DC48V
3
5
4
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.0
Reference
See the "Network and Access
Ports" section on page 3-4
guidelines.
See the "Network and Access
Ports" section on page 3-4
guidelines.
7
6
Installing the Cisco Unified IP Phone
for
for
3-7