Using Cisco Unified Ip Phones With Different Protocols; Converting A New Phone From Sccp To Sip - Cisco 7965G Administration Manual

Using Cisco Unified IP Phones with Different Protocols

•
•
Using Cisco Unified IP Phones with Different Protocols
The Cisco Unified IP Phone can operate with SCCP (Skinny Client Control Protocol) or SIP (Session
Initiation Protocol). You can convert a phone that is using one protocol for use with the other protocol.
This section includes these topics:
•
•
•
•

Converting a New Phone from SCCP to SIP

A new, unused phone is set for SCCP by default. To convert this phone to SIP, perform these steps:
Procedure
Take one of these actions:
Step 1
•
•
•
Refer to Cisco Unified Communications Manager Administration Guide for detailed information about
Cisco Unified Communications Manager configuration. Refer to Cisco Unified Communications
Manager Bulk Administration Guide for detailed information about using the BAT.
If you are not using DHCP in your network, configure the network parameters for the phone.
Step 2
See the "Configuring Startup Network Settings" section on page 3-14.
Power cycle the phone.
Step 3
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.0
2-12
Adding Phones with Auto-Registration and TAPS, page 2-10
Adding Phones with Cisco Unified Communications Manager Administration, page 2-11
Converting a New Phone from SCCP to SIP, page 2-12
Converting an In-Use Phone from SCCP to SIP, page 2-13
Converting an In-Use Phone from SIP to SCCP, page 2-13
Deploying a Phone in an SCCP and SIP Environment, page 2-13
To auto-register the phone, set the Auto Registration Phone Protocol parameter in Cisco Unified
Communications Manager Administration to SIP.
To provision the phone using the Bulk Administration Tool (BAT), choose the appropriate phone
model and choose SIP from the BAT.
To provision the phone manually, make the appropriate changes for SIP on the Phone Configuration
page in Cisco Unified Communications Manager Administration.
Chapter 2 Preparing to Install the Cisco Unified IP Phone on Your Network
OL-12650-01