Accessing The Web Page For A Phone - Cisco 7965G Administration Manual

Accessing the Web Page for a Phone

Accessing the Web Page for a Phone
To access the web page for a Cisco Unified IP Phone, perform these steps.
If you cannot access the web page, it may be disabled. See the
Note
Access" section on page 8-3
Procedure
Step 1 Obtain the IP address of the Cisco Unified IP Phone using one of these methods:
•
•
Open a web browser and enter the following URL, where IP_address is the IP address of the
Step 2
Cisco Unified IP Phone:
http://IP_address
The web page for a Cisco Unified IP Phone 7965G and 7945G includes these hyperlinks:
•
•
•
•
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.0
8-2
for more information.
Search for the phone in Cisco Unified Communications Manager by choosing Device > Phone.
Phones registered with Cisco Unified Communications Manager display the IP address at the top of
the Phone Configuration web page.
On the phone, press the Settings button, choose Network Configuration, and then scroll to the IP
Address option.
Device Information—Displays device settings and related information for the phone. For more
information, see the "Device Information" section on page
Network Configuration—Displays network configuration information and information about other
phone settings. For more information, see the
Network Statistics—Includes the following hyperlinks, which provide information about network
traffic:
Ethernet Information—Displays information about Ethernet traffic. For more information,
–
see the "Network Statistics" section on page
Access—Displays information about network traffic to and from the PC port on the phone. For
–
more information, see the
Network—Displays information about network traffic to and from the network port on the
–
phone. For more information, see the
Device Logs—Includes the following hyperlinks, which provide information that you can use for
troubleshooting:
Console Logs—Includes hyperlinks to individual log files. For more information, see the
–
"Device Logs" section on page
Core Dumps—Includes hyperlinks to individual dump files.
–
Status Messages—Displays up to the 10 most recent status messages that the phone has
–
generated since it was last powered up. For more information, see the
page 8-10.
Debug Display—Displays messages that might be useful to the Cisco TAC if you require
–
assistance with troubleshooting. For more information, see the
page 8-10.
Chapter 8
"Network Configuration" section on page
8-8.
"Network Statistics" section on page
"Network Statistics" section on page
8-10.
Monitoring the Cisco Unified IP Phone Remotely
"Disabling and Enabling Web Page
8-3.
8-8.
8-8.
"Device Logs" section on
"Device Logs" section on
8-5.
OL-12650-01