Table of Contents
Advertisement
Cleaning the Oiler Belt
86
InfoPrint 3000 Operator's Guide
Notes to the Operator On Cleaning the Oiler Belt
v For reliable printer performance, clean the oiler belt at least once each
week.
v You need the following items to clean the oiler belt:
– Lightweight cardboard (scraps)
– Cloth or paper towels.
v It is not necessary to switch the printer power off during this procedure,
but the printer should be disabled.
CAUTION:
<70> The oiler belt, oiler wick roll, and their environments are
high-temperature
these areas.
1. SELECT the Stop pushbutton on the Display Touch Screen window for the
affected printer.
2. Open the stacker end cover.
areas. Be very careful when working in
Advertisement
Table of Contents
