Table of Contents
Advertisement
7. Locate the Developer Mix Inlet (1), the Developer Drain Lever B (2), and the
Developer Run Pushbutton A (3) in the developer area.
Important
a. Never open the developer drain unless the developer drain hose is
inserted into an empty developer mix bottle.
b. After you have opened and closed the developer drain, you must
replace the developer mix. Opening the drain resets the developer
mix usage timer. Resetting the timer without changing the developer
mix could result in severe print quality problems that are caused by
the developer mix being used beyond its normal life.
Chapter 7. Ordering and Replacing Supplies
195
Advertisement
Table of Contents
