Table of Contents
Advertisement
|
|
|
|
196
InfoPrint 3000 Operator's Guide
8. Open the Developer Drain Lever B by pulling out the lever and then lifting it
upward.
9. The developer mix starts draining immediately. Hold the drain hose so that it
does not come out of the empty mix bottle. Shake the hose several times while
the mix is draining to ensure that no developer mix remains in the hose.
10. Press the Developer Run Pushbutton A (1) one time to ensure that all of the
developer mix is drained. There should be about 1.8 liters of used developer
mix in the bottle.
Advertisement
Table of Contents
