IBM INFO PRINT 3000 Operator's Manual page 265

Table 17. Parallel Channel Attachment Items (continued)
Configuration Item
Data Transfer
Protocol
Data Streaming Rate
Card 1 Slot Position
|
|
|
|
Card 2 Slot Position
|
|
|
|
Description
Specifies the data transfer mode to be used: DC
Interlocked or Data-Streaming.
If two channels are installed, both channels use the same
protocol.
Specifies the data rate being used if you select the
Data-Streaming Data Transfer Protocol. Use the highest
rate that is supported by your system.
If two channels are installed, both channels use the same
data rate.
The printer sets this entry automatically at power on time
if the system senses the presence of a Parallel Channel
card. This item is not selectable.
The printer sets this entry automatically at power on time
if the system senses the presence of a Parallel Channel
card. This item is not selectable.
Value Options
Interlocked or Data Streaming
v 1.9 MB/sec
v 2.7 MB/sec
v 3.4 MB/sec
v 4.5 MB/sec
v 2 or 4 or Not Installed (for
Model ES1)
v 6 or 8 or Not Installed (for
Models ED1/ED2)
v 2 or 4 or Not Installed (for
Model ES1)
v 6 or 8 or Not Installed (for
Models ED1/ED2)
Chapter 8. Configuring the System
233