IBM INFO PRINT 3000 Operator's Manual page 61

Using This Control: Does This:
Moves the stacker table up.
Stops the movement of the stacker table.
Moves the stacker table down.
Forms Feed Advances the forms to allow them to stack with the original folds
at the perforations.
Note: You use the NPRO pushbutton on the Display Touch Screen
to advance the forms for separation.
Forms Select Sets the weight or kind of form to be used, as well as the fusing
temperature and the amount of fuser oil used during printing. The
current selection is indicated by an LED. Not setting Forms Select
correctly can reduce print quality.
v The A setting is for 16-22 lbs (60-82 g/m
v The B setting is for 23-42 lbs (83-157 g/m
v The C setting lowers the fuser temperature and should be used
should not be used for heavier weight forms.
more fuser oil than setting A and should not be used for lighter
weight forms.
when printing adhesive labels or other special composition
forms.
2
) weight forms. It
2
) weight forms. It uses
Chapter 3. Functional Areas
29