Table of Contents
Advertisement
CAUTION:
<70> The oiler belt, oiler wick roll, and their environments are
high-temperature
these areas.
1. Open the stacker end cover.
Note: When the oiler-belt gate is opened, the fuser begins to cool down
immediately, and the message changes to OILER GATE OPEN.
2. Turn the wing nut counterclockwise to release the oiler-belt gate.
3. Place several layers of absorbent material, such as paper towels, on the floor
beneath the oiler-belt gate.
areas. Be very careful when working in
Chapter 7. Ordering and Replacing Supplies
205
Advertisement
Table of Contents
