Forms Input And Transfer Station Area - IBM INFO PRINT 3000 Operator's Manual

Forms Input and Transfer Station Area

You load forms that are ready for processing into the printer at the forms input
area. The developer mix bottle and drain hose are also in the forms input area.
In the transfer station area, print images are transferred from the photoconductor
drum to the forms that are traveling through the printer. "Printer Control Panel"
on page 23 describes the printer control panel in detail.
1
2
3
4
5
6
22
InfoPrint 3000 Operator's Guide
Transfer station
Developer area
Printer control panel
Forms input area
Static brushes
Tension arm