Enabling A Host Attachment; Disabling A Host Attachment - IBM INFO PRINT 3000 Operator's Manual

Enabling a Host Attachment

1. From the Options pull-down menu, SELECT the Enable/Disable Attachments
2. From the list of currently installed attachments, SELECT the attachment you
3. Make the printers Ready.

Disabling a Host Attachment

1. From the Options pull-down menu, SELECT the Enable/Disable Attachments
2. From the list of currently installed attachments, SELECT the attachment you
3. If you want the printer active for attachments that are not disabled, choose one
64
InfoPrint 3000 Operator's Guide
procedure.
want to enable, then SELECT the Enable pushbutton.
v In duplex mode, SELECT the Ready pushbutton on the Display Touch
Screen main window.
v In dual simplex mode, SELECT the Ready pushbutton on the target printer
Display Touch Screen window.
v In simplex mode, SELECT the Ready pushbutton on the Display Touch
Screen window.
procedure.
want to disable, then SELECT the Disable pushbutton.
of the following methods:
v In duplex mode, SELECT the Ready pushbutton on the Display Touch
Screen main window.
v In dual simplex mode, SELECT the Ready pushbutton on the target printer
Display Touch Screen window.
v In simplex mode, SELECT the Ready pushbutton on the Display Touch
Screen window.