Options Pull-Down Menu - IBM INFO PRINT 3000 Operator's Manual

To Change the Password or Authorization Level, do the following:
1. From the Options pull-down menu, SELECT Password.
Figure 23. Options Pull-Down Menu
2. To change the Authorization Level, SELECT the Authorization Level to which
3. To change a password, first SELECT the Authorization Level you wish to
80
InfoPrint 3000 Operator's Guide
Operate Configure
Ready
Check Reset
you wish to change.
If you are not changing to the Operator level, then the Password Keypad
window appears. Enter the password, and SELECT the OK pushbutton.
change. Then do the following:
a. If you select a level that the system is not currently in, the Password
Keypad window appears. Enter the password, and SELECT the OK
pushbutton.
b. When the Password window returns, SELECT the Change pushbutton. The
Password Keypad window appears.
c. Enter the new password and SELECT the OK pushbutton to change the
password.
If you decide not to change the password, SELECT the Cancel pushbutton.
Analyze Options
Assign Form to Load...
Enable/Disable Attachments...
Password...
Change Language...
Clean Screen...
Calibrate Touch Screen...
Front Face...
Special Features...
NPRO
Help
Cancel Job