Changing The Oiler Belt - IBM INFO PRINT 3000 Operator's Manual

Ibm printer user manual
Table of Contents

Advertisement

Changing the Oiler Belt

|
|
204
InfoPrint 3000 Operator's Guide
Attention!
You may leave printer power on while you perform this task, but the printer
should not be printing.
Do this task when you see the following message:
CHANGE
OILER BELT 0793
Note: You do not have to replace the oiler belt the first time you see the CHANGE
OILER BELT message. To bypass the message, SELECT the Ready pushbutton
on the main Display Touch Screen. The message reappears each time
end-of-forms is reached or every 4 000 feet of forms thereafter. When 10 000
additional feet of forms have been processed since the message originally
appeared, you must change the oiler belt before you can return the printer to
Ready status.
You need the following items when you change the oiler belt:
v New oiler belt
v Paper towels.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Infoprint 3000

Table of Contents