Forms Are Not Loaded In Printer 2; Forms Are Not Loaded In Printer 2; Threading Without Printing - IBM INFO PRINT 3000 Operator's Manual

8. If a postprocessing device is installed and not threaded, SELECT the Feed
9. SELECT the Completed pushbutton on the window.
10. To resume printing the queued job, SELECT the Ready pushbutton on the

Forms Are Not Loaded In Printer 2

These procedures assume the following:
v You have visually checked that forms have been threaded in Printer 1, and
v The main Thread/Align Forms procedure window appears on the Display Touch
v A print job is queued if you intend to select the "Print While Threading"

Threading Without Printing

158
InfoPrint 3000 Operator's Guide
Important
If your visual verification of alignment is incorrect, all following duplex
print jobs are printed with incorrect alignment between the front and back
of the pages.
Forms pushbutton on the window as many times as necessary to advance the
forms enough to thread the postprocessing device.
Printer 2 prints Side 2 pages starting on the page following the alignment page
during these forms forward movements. If the queued job is long enough,
Printer 1 continues printing Side 1 pages.
This completes this type of Thread/Align Forms procedure.
main Display Touch Screen window.

forms are not loaded in Printer 2.

Screen.
Yesoption.
1. SELECT the No option within the Print While Threading? field.
2. SELECT the Start pushbutton.