IBM INFO PRINT 3000 Operator's Manual page 260

Table 16. Printer Configuration Items (continued)
Configuration Item Description
Beam 5 offset (See information in Beam 1 offset adjustment)
adjustment for
Printer 2 (D)
Machine Sequence (CE Change on Initial Configuration Only) This is the
for Printer 1 serial number for Printer 1 (7 numeric only characters).
Each time the AFCCU hard disk is replaced, this data is
lost; the CE must enter the serial number found on the
rear inside of the AFCCU frame again.
Manufacturing Plant (CE Change on Initial Configuration Only) This is the
for Printer 1 code for plant of manufacture of Printer 1 (2 numeric
only characters). Each time the AFCCU hard disk is
replaced this data is lost; the CE must enter this code
again from information saved from the last time Printer
Configurations were changed.
Machine Sequence (CE Change on Initial Configuration Only) This is the
for Printer 2 serial number for Printer 1 (7 numeric only characters).
Each time the AFCCU hard disk is replaced, this data is
lost; the CE must enter the serial number found on the
rear inside of the AFCCU frame again.
Manufacturing Plant (CE Change on Initial Configuration Only) This is the
for Printer 2 code for the plant of manufacture of Printer 2 (2 numeric
only characters). Each time the AFCCU hard disk is
replaced, this data is lost; the CE must enter this code
again from information saved from the last time Printer
Configurations were changed.
Date and Time (CE Change Only). This is in the form of
mmddHHMM.ssyy. mm=month dd=day HH=hour
MM=minute ss=second yy=year
228
InfoPrint 3000 Operator's Guide
Value Options
(See information in Beam 1 offset
adjustment)
N/A
N/A
N/A
N/A
N/A