Table of Contents
Advertisement
|
|
|
|
|
STACKER AREA:
28. Open the stacker gate (5) if the buffer/flipper unit or an installed
postprocessing device does not interfere.
29. Use a toner-certified vacuum cleaner to clean paper dust, chads, and other
debris from the following:
v Pendulum (1)
v Stacker table (2)
v Stacker floor (3)
v Finger belts (4)
If you cannot open the stacker gate completely because of interference from
the buffer/flipper unit or an installed postprocessing device, open the gate as
wide as you can. Clean as much of the area as you can reach.
Chapter 6. Operator Responsibilities
97
Advertisement
Table of Contents
