IBM INFO PRINT 3000 Operator's Manual page 138

10. Guide the forms under the transfer station brushes and up to the tractor area.
11. Place the forms on the front tractor pins and close the tractor cover.
12. Slide the blue rear lever on the adjustable tractor assembly until the rear
13. Place the forms on the rear tractor pins and close the rear tractor cover.
14. Slide the rear blue lever on the adjustable tractor assembly until the forms are
15. Press down firmly on the blue lever to ensure the rear tractor assembly is
16. Press and hold the Forms Feed button to feed approximately 1.3 meters (4
17. Lower the transfer station and latch it.
106
InfoPrint 3000 Operator's Guide
8. Pull the forms over the forms guides.
9. Open the two lower tractor covers.
tractor is approximately the width of the forms.
Note: Verify that the holes are aligned correctly.
smooth and taut between the front and rear tractors.
locked in place.
feet) of forms, enough to reach the tension arm.