Screen Saver Timeout; Procedure Windows In Cascade Format - IBM INFO PRINT 3000 Operator's Manual

procedure will not start another procedure of the same type. The window will
display the procedure window at the front of the cascade. However, in dual
simplex mode the same procedure can be open and active on both Printer 1 and
Printer 2 Display Touch Screen windows.
Figure 9 shows:
1
2
3
4
5
Use the scroll bar to the right of the Switch to pop-up window to view the names
of additional open procedures. When you select a procedure, the procedure
window appears at the front of the cascade.
3
4
Figure 9. Procedure Windows in Cascade Format

Screen Saver Timeout

When there is no user interaction or error condition on the operator console for a
period of time, the console goes blank. Only a "floating" logo (screen saver)
appears.
To return to the normal display, simply touch the screen.
The screen saver timeout period (length of time without user interaction before the
screen saver comes on) is set under the Configure Printer procedure. The timeout
period ranges from 0 to 60 minutes. You may set different timeout periods for each
printer in duplex mode and for both Printer 1 and Printer 2 in simplex mode. In
40
InfoPrint 3000 Operator's Guide
The Main Window
Four of the five maximum procedure windows
The System Menu pull-down menu
The Switch to pop-up window, which lists all open procedures
A symbol that indicates that more than five procedures are open.
Operate
Configure
Enable/Disable Attachments
Switch To...
Print Screen Print Samples
Enable/Disable Attachments
Close
Traces
Cancel Job
Text
Print
Ready
Check Reset
Analyze Options
Traces
Traces
Cancel Job Traces
Traces
Print Samples
Switch To
How Many?
1
Help
Cancel
NPRO
Help
5
+
MORE
1
2
Cancel Job