Selecting Manual Or Thermostat Mode - Enerzone EUROSTAR Installation And Operation Manual

If overheating occurs, fan speed reduction will be automatically deactivated and an envelope icon
will replace the fan icon on the Main Status Page. Press on the envelope icon to view the
warning message. Meanwhile, the convection fan will work at its highest setting until the stove
reaches a safe temperature. Once the stove reaches that temperature, it will go back to the
previously selected fan speed.

6.1.8 Selecting Manual or Thermostat Mode

To change operating mode press the thermometer icon
choose the letter icon
Indicates that the stove is in manual mode. It will therefore run continuously on the
selected setting until it is manually modified, turned OFF or if the stove runs out of
pellets.
Indicates that the stove is in thermostat mode. The red waves indicate that the
thermostat is calling for heat. It will heat at the selected combustion level until the
thermostat has reached room temperature setting.
The waves will disappear once the thermostat has reached room temperature setting.
At this time the combustion level will switch into the selected pilot mode until its cycle
is completed. When thermostat calls for heat, the icon will change for the one with
waves and combustion level will use the last setting.
32
then select "SETUP" and "MODE".
, or, from the Main Status Page,
Eurostar Installation and Operation Manual