Filling Or Purging Auger Housing - Enerzone EUROSTAR Installation And Operation Manual

6.1.10 Filling or Purging Auger Housing

Note: This function is disabled when the stove is running.
To fill or purge the auger housing press the auger icon and select either "FEED AND
START", "PURGE SCREW" or "ADD PELLETS" in the displayed page.
6.1.10.1 Feed and Start
Use this option when you start the stove for the first time of the season or after the hopper ran out
of pellets. The auger will turn for one minute then the stove will automatically start an ignition cycle.
6.1.10.2 Purge Screw
Use this option to empty the auger at the end of the season. When selected, the auger will turn for
two minutes.
6.1.10.3 Add Pellets
Use this option to manually feed more pellet in the burn pot. When selected, the auger will turn for
20 seconds.
34 Eurostar Installation and Operation Manual