Enerzone EUROSTAR Installation And Operation Manual page 28

Description of each main status page icon:
Indicates that the stove is in the manual mode.
continuously on the selected setting until it is manually modified, turned
OFF or if the stove runs out of pellets (see Section 6.1.8 Selecting
Manual or Thermostat Mode).
Indicates that the stove is in the thermostat mode. The red waves indicate
that the thermostat is calling for heat. The waves will disappear once the
thermostat has reached room temperature setting (see Section 6.1.8
Selecting Manual or Thermostat Mode).
Indicates the exhaust temperature.
numeric value will disappear and "COOL" will be displayed.
COOL
135ºF
Selecting the flame icon will bring you to the heat control scroll bar. Moving
the cursor to the left will reduce the feed of pellets therefore produce less
heat and moving it to the right will increase the feed of pellets which will
produce more heat (see Section 6.1.6 Adjusting the Combustion Level
(Heat Output)).
Indicates that the stove is
"Off".
Indicates that the stove is in
thermostat mode, in pilot
cycle
calling.
Selecting the letter icon will display a menu screen where you can access
the following pages: Set-up, Trouble shoot, Statistics and Program (see
Section 6.1.2 Configuration and Operation Diagram).
Selecting the grey auger icon will display the auger option menu. Once
auger option is selected auger icon will show a red arrow and will blink until
the end of the chosen option (see Section 6.1.10 Filling or Purging
Auger Housing).
The grey fan icon indicates that the convection fan is on default setting.
The grey fan icon with red arrows indicates that fan speed default setting
has been reduced with the optional fan speed scroll bar (see Section 6.1.7
Convection Fan Speed Reduction (Optional)).
Indicates the selected pilot cycle. Once selected, one of the following
cycles, (30min, 45min, 60min, Always On or Always Off) will display under
the hourglass icon (see Section 6.1.9 Selecting The Pilot Cycle). Default
setting is "Always Off".
Indicates that unusual cycle has been detected. When this occurs, the
envelope icon will be displayed in replacement of the convection fan icon.
Press on the envelope to read the warning message.
28
waiting for heat
It will therefore run
If temperature is below 115⁰F, the
Indicates that the stove is either
"On" in manual mode or calling for
heat in thermostat mode.
Indicates that the stove is in
thermostat mode but not calling
for heat and pilot
completed.
Eurostar Installation and Operation Manual
cycle is