Enerzone EUROSTAR Installation And Operation Manual page 39

1. Clean the burn pot using the scraper provided with the stove or a brush.
2. Release the clips on both sides of the burn pot then, remove the burn pot by lifting and pulling it
out. Once the burn pot is removed make sure all holes are clean. Clean thoroughly under the
burn pot with an ash vacuum to remove ashes that may have accumulated.
3. If necessary, clean the air intake channel. To reach the air intake channel clean out trap, open
the ash drawer access door and remove the ash drawer. Unscrew the wing nut to open the
clean out trap. Vacuum the combustion residues.
Eurostar Installation and Operation Manual 39