Enerzone EUROSTAR Installation And Operation Manual page 9

•
DO NOT CONNECT TO OR USE IN CONJUNCTION WITH ANY AIR DISTRIBUTION
DUCTWORK.
•
THE VENTING SYSTEM MUST BE COMPLETELY AIRTIGHT AND PROPERLY
INSTALLED. ALL VENT CONNECTOR JOINTS MUST BE SEALED AND FASTENED IN
ACCORDANCE WITH THE PELLET VENT MANUFACTURER'S INSTRUCTIONS TO
ENSURE CONSISTENT PERFORMANCE AND AVOID SMOKE AND ASH SPILLAGE.
•
THE VENTING SYSTEM SHOULD BE CHECKED, AT LEAST TWICE A YEAR FOR ANY
BUILDUP OF SOOT OR CREOSOTE.
• NEVER BLOCK ANY LOUVERS OF THE STOVE.
• IF REQUIRED, A FRESH AIT KIT CAN BE INSTALLED TO SUPPLY COMBUSTION AIR TO
THE ROOM OR SPACE (see Appendix F: Combustion Air Supply).
•
MIXING OF APPLIANCE COMPONENTS FROM DIFFERENT SOURCES OR MODIFYING
COMPONENTS IS PROHIBITED AND WILL VOID THE WARRANTY.
•
ANY MODIFICATION OF THE STOVE THAT HAS NOT BEEN APPROVED IN WRITING BY
THE TESTING AUTHORITY IS PROHIBITED AND VIOLATES CSA B365 (CANADA), AND
ANSI NFPA 211 (USA).
•
STOVE BUILDER INTERNATIONAL INC. (SBI) GRANTS NO WARRANTY, IMPLIED OR
STATED, FOR THE POOR INSTALLATION OR LACK OF MAINTENANCE OF YOUR
STOVE AND ASSUMES NO RESPONSIBILITY OF ANY CONSEQUENTIAL DAMAGES.
Eurostar Installation and Operation Manual 9