Testing Components - Enerzone EUROSTAR Installation And Operation Manual

WARNING: RISK OF ELECTRICAL SHOCK. IF YOU NEED TO MANUALLY TEST,
MANIPULATE OR
DISCONNECTED FROM THE WALL OUTLET.
To validate the status of a component, you need to go to the "TROUBLESHOOT" page. From the
Main Status Page, Press the "LETTER" icon
Once there you will be able to navigate through 5 pages.
45 MIN
PAGE 1 PAGE 2
PRESSURE
NO FUEL COUNT : 0
HOPPER
OVERHEAT COUNT : 0
THERMOSTAT
FAILED IGNITION COUNT : 0
L250-A AUGER FUSE COUNT : 0
IGNITOR FUSE COUNT : 0
F160
EXIT
On page 1 you will see a list of every electronic component status. If the square has a green color,
it means the status of the component is normal, regardless if it is on the left or right column. If the
square has a red color, it means that its status is abnormal. This screen will give you status in real
time, meaning that when the stove is running, if a component status change, you will see it right
away. Page 2 and 3 will give you statistics on how many times you had a specific error code.
WITH GREEN ICONS
WITH RED ICONS

9.2 Testing Components

If you suspect an electrical component to be defective, you can test it from the "TROUBLESHOOT"
page. From the Main Status Page, Press the "LETTER" icon
46
REPLACE ANY COMPONENTS,
COOL
PAGE 3
HOPPER LID COUNT : 0
BLOCKED FLUE COUNT : 0
VOLTAGE : 115V
FREQUENCY : 60Hz
POLARITY : PASS
EXIT
THE
and choose "TROUBLESHOOT" in the menu.
SETUP
COOL
STATISTICS
MAIN STATUS PAGE
PAGE 4
GEAR MOTOR 1
GEAR MOTOR 2
IGNITOR
EXIT
Pressure switch is at closed state.
This is normal state.
Pressure switch is at opened state.
This is normal state.
Pressure switch is at closed state.
This is abnormal state.
Pressure switch is at opened state.
This is abnormal state.
and choose "TROUBLESHOOT"
Eurostar Installation and Operation Manual
STOVE NEEDS TO
TROUBLE
SHOOT
PROGRAM
PAGE 5
COMBUSTION
EXHAUST
CONVECTION
EXIT EXIT
BE