Table of Contents
Advertisement
3.3 Back Wall Installation
For a back wall installation, in order to allow
the LCD sliding support to move freely and
fully extend, you should allow a minimum of
4"(105 mm) clearance from the side wall (B)
and 3"(80 mm) clearance at the back of the
stove, from the fresh air intake (A). However,
if you wish to install the stove with minimum
clearances
(see
table
in Section
3.2
Minimum Clearances to Combustibles), it
is possible to locate the LCD touch screen
elsewhere but within the maximum length of
the Telco wire provided. You could also want
to install the LCD sliding support on the left
side of the stove (see Appendix B: LCD
Sliding Bracket Mounting).
3.4 Corner Installation
For a corner installation, in order to allow the LCD sliding
support to move freely and fully extend, you should allow a
minimum of 6¼'' (160 mm) clearance to the adjacent walls
(C). However, if you wish to install the stove with minimum
clearances (see table in Section 3.2 Minimum Clearances
to Combustibles), it is possible to locate the LCD touch
screen elsewhere but within the maximum length of the
Telco wire provided. You could also want to install the LCD
sliding support on the left side of the stove (see Appendix
B: LCD Sliding Bracket Mounting).
3.5 Ceiling Clearances
For ceiling clearances refer to the table in Section 3.2
Minimum Clearances to Combustibles.
12
Eurostar Installation and Operation Manual
Hide quick links:
Advertisement
Table of Contents
