Panic Alarms - LifeShield Home Security Quick Setup Manual

Panic Alarms

A Panic Alarm is generated by pressing and holding the yellow PANIC key on the Handset and Console or pressing and
i
holding the STAY and AWAY key on the Keychain Remote, if these keys are enabled in your system.
For Personal Monitoring subscribers, the PANIC key will only generate a local alarm and there
The Handset has a sliding cover
over the PANIC alarm key to will be no emergency dispatch. The description below, showing an option to choose between
protect it from accidentally being
PANIC police, PANIC medical or PANIC fire, only appears for Alarm Monitoring subscribers.
pressed. You must slide it down
before pressing PANIC.
Generating a Panic Alarm (Handset/Console) (Figure 32):
For Alarm Monitoring subscribers,
the Alarm Monitoring Center will
not call to verify a PANIC alarm,
1.
but will immediately call the au-
2.
thorities and there may not be an
opportunity to cancel the dispatch.
If an option is not selected within 5 seconds, an alarm will sound and a PANIC police message will be sent to the Alarm
Monitoring Center.
Cancelling a Panic Alarm (Handset/Console) (This may not stop dispatch) :
1.
2.
Generating a Panic Alarm (Keychain Remote):
Press and hold AWAY and STAY at the same time.
[55]
U S I N G Y O U R S E C U R I T Y S Y S T E M
Press and hold PANIC for 2 seconds
Scroll to the desired agency, press SELECT
Press 1: Police
Press 2: Medical
Press 3: Fire
BACK SELECT
ALARMED
Panic
Calls:0 Mgs:0
BACK SELECT
Press CANCEL/OFF
Enter your User Code
Disarming
Enter Code
****
BACK SELECT
PANIC
Figure 32. Handset PANIC Key
[www.LifeShield.com]