Installing The Console - LifeShield Home Security Quick Setup Manual

Console Kit Contents
KPC1000 LifeShield Console
PSC0101 Power Adapter
LS180 Ni-MH Rechargeable Battery Pack
Table Stand
Wall Plate
Determine the Location
The Console may be used on a table top, mounted to the
wall or on a telephone wall plate near an electrical outlet.
Install the Console
Install Battery Pack
a) Locate the Battery Pack.
b) Remove the battery compartment door.
c) Plug the 2-wire battery pack cord into the plug
receptacle and insert the battery into the
battery compartment.
d) Snap on the battery compartment door.
[www.LifeShield.com]

Installing the Console

I N S T A L L I N G Y O U R S E C U R I T Y S Y S T E M
i
Console will illuminate when
battery pack is first connected.
!
RISK OF EXPLOSION IF BAT-
TERY IS REPLACED BY AN IN-
CORRECT TYPE. DISPOSE OF
USED BATTERIES ACCORDING
TO THE INSTRUCTIONS.
[14]