LifeShield Home Security Quick Setup Manual page 38

Add the Console to Your LifeShield System
Follow these steps for adding an additional Console to a LifeShield system.
Consoles packed with starter kits are pre-registered and do not require
these steps.
After the initial installation of the LifeShield system, devices may be added to
enhance access or performance.
The maximum number of devices that can be added to a LifeShield system is
shown in the table.
After the Console is installed, use a Handset or Console that is currently registered on the system to add the new Console.
Adding Another Console
1. On an existing Handset or Console, use the SCROLL and SELECT buttons to navigate to GC or Handset (Menu/Security Setup/GCs or Handset/<Add New>)
2. Press the SELECT key to <Add New>. The system will begin searching for the new Console
3. On the New Console, press the SEARCH button
4. The system display and audio signal will inform you the Console is found. Press OK
5. You will then be given the option to edit the default name
6. Use DELETE to erase the current name and replace with new text by using the keypad
7. Press OK
[www.LifeShield.com] [www.LifeShield.com]
New Console Existing Handset
System Found
Please Wait
60 Seconds
CANCEL
New Console
Edit Name
Console 2
DELETE OK
I N S T A L L I N G Y O U R S E C U R I T Y S Y S T E M
Installing the Console
* The system will allow a maximum of 8 Handset/Console
or Grid Extender combinations.
Console Added
OK
[18] [18]