Installing The Keychain Remote - LifeShield Home Security Quick Setup Manual

Installing the Keychain Remote

Keychain Remote Contents
!
With Panic enabled, a
simultaneous press and hold
of the Stay and Away keys will
send an alarm message.
LifeShield Central Monitoring
authorities will be dispatched
immediately without verifying
the alarm.
Install the Keychain Remote
Up to 4 Keychain Remotes may be assigned to system users.
Each Keychain Remote is identified with a User Code. Follow these steps to add a Keychain Remote:
You will need a Handset or Console to add a Keychain Remote.
On the Handset or Console:
Assign a User
Scroll to the desired User and press SELECT.
Enable the Panic Feature
Scroll to Enabled or Not Enabled and press SELECT for the Panic feature.
[25]
I N S T A L L I N G Y O U R S E C U R I T Y S Y S T E M
Enter the Security Menu
1. Scroll to the Security Setup and press SELECT.
2. Enter Code.
Add the Keychain Remote to the System
1. Scroll to Keychains and press SELECT.
2. Press SELECT for <Add New>.
3. Wait 5 seconds. When the prompt appears, press all Keychain buttons at the same time.
You will have 30 seconds to complete this step.
LifeShield will then verify the Keychain Remote is communicating with the system.
"Keychain Found & Added" will be displayed when done.
1. Press OK.
[www.LifeShield.com]