LifeShield Home Security Quick Setup Manual page 49

Installing the Siren Detector
Select and Mark the Bracket Mounting Location
Locate and remove the Installation Template on the bottom of the Siren Detector box.
Place the Installation Template directly next to the (existing) hazard detector so that the large curved side of the template rests against the outer edge of the hazard
detector.
Using a pencil or pen, mark the location of the two (screw) hole openings in the template on the ceiling. These marks will be used as a mounting location reference
in the next step.
Install the Siren Detector Bracket
Attach the Siren Detector Bracket to the ceiling using either of the two methods described below. Materials for both options
are provided.
a.) Double-faced adhesive tape installation
Remove the paper backing from the double-faced adhesive tape. Position the Siren Detector Bracket slightly below the ceiling (over the marks made in the
previous step) such that the arrow on the inside of the Bracket faces the hazard detector. Press the Bracket onto the ceiling.
[29]
I N S T A L L I N G Y O U R S E C U R I T Y S Y S T E M [www.LifeShield.com]