Installing The Handset - LifeShield Home Security Quick Setup Manual

Installing the Handset

t
The jack is keyed so that the plug
can only be inserted in one
direction. Be careful not to
crimp the wire.
i
The Handset display will illuminate
when the Battery is connected.
!
Use only LifeShield rechargeable
Battery Packs specified for your
Handset.
Replacement Battery Packs are
also available through LifeShield
Customer Support at 1-888-392-
2044 or online at
www.LifeShield.com. Use only the
supplied AC power adapter. Do not
use any other adapter.
Place the power adapter cord so
that it does not create a trip
hazard, or become pinched and
create an electrical hazard.
!
Caution: RISK OF EXPLOSION IF
BATTERY IS REPLACED BY AN
INCORRECT TYPE. DISPOSE OF
USED BATTERIES ACCORDING
TO THE INSTRUCTIONS.
[11]
I N S T A L L I N G Y O U R S E C U R I T Y S Y S T E M
Handset Kit Contents
HSC1000 Handset
CHC1000 Charging Cradle
PSC0101 Power Adapter
Belt Clip
LS80 Ni-MH Rechargeable Battery Pack
Install the Handset and Charger
Install Battery Pack
a) Open the Battery compartment.
b) Insert the Battery plug into the two-pin jack, and insert the Battery.
c) Replace the Battery cover.
Use only the LifeShield LS80 Battery Pack.
[www.LifeShield.com]