Arm Modes - LifeShield Home Security Quick Setup Manual

There are 3 different modes in which you can arm your LifeShield Home Security system: Stay, Away, and Instant Stay. (Refer to Table 1) These are easily set on
the Handset, Console or LifeShield.com (Refer to Figure 24)
Stay (Staying Home – Day Time)
• Stay is typically used when someone is staying home and you want certain Sensors to be ignored (i.e. Motion Sensors
and interior doors).
• Door, window and Glassbreak Sensors are factory default to be monitored.
• Exit and Entry Delay is provided to allow people time to leave and return.
Instant Stay (Staying Home – Night Time)
• Instant Stay is typically used in the evening when you are not expecting anyone to enter your home.
• No Exit or Entry Delay is provided so that when a Sensor is faulted, the system will alarm immediately.
Away (Leaving Home)
• Away is typically used when no one is staying home.
• All Sensors are monitored except Convenience Sensors. Motion Sensors are monitored in the Away mode.
• Exit Delay is provided allowing you to exit your home before the system is armed.
• Entry Delay is provided allowing you to disarm the system upon entry into your home.
• If you don't leave your home after arming Away, the factory default setting reverts to armed Stay. This can be changed on
www.LifeShield.com, Settings tab, under System Settings.
Arming Mode Exit Delay
Away YES
Stay YES
Instant Stay NO
Table 1: Arm Mode Summary
[www.LifeShield.com]
Entry Delay
YES
YES
NO
U S I N G Y O U R S E C U R I T Y S Y S T E M

Arm Modes

STAY
INSTANT
AWAY
Figure 24. Handset Arm Security Keys
[48]