LifeShield Home Security Quick Setup Manual page 32

Add the Handset
Attach Belt Clip
Snap the Belt Clip onto the sides of the Handset.
Connect the Charging Cradle
Connect the Charging Cradle power adapter to the bottom of the Charging Cradle and to the electrical wall outlet.
Charge the Handset
Place the Handset in the Charging Cradle. When properly seated on the cradle, the amber light on the front of the cradle will be
illuminated.
Immediately place the Handset in the Charging Cradle that came packed with the Handset. THE HANDSET MUST BE CHARGED
FOR AT LEAST 30 MINUTES PRIOR TO ATTEMPTING ANY SECURITY SYSTEM INSTALLATION. IT MUST BE CHARGED FOR 2 HOURS
BEFORE MAKING PHONE CALLS.
[www.LifeShield.com]
Installing the Handset
I N S T A L L I N G Y O U R S E C U R I T Y S Y S T E M
i
The phone system comes with
various settings pre-defined from
the factory. Should you want to
change these settings, we suggest
waiting until after you activate your
system. These settings include ring
tones, ring volume, distinctive
ringing, display contrast, etc.
[12]