Phone Setup - Cisco 8800 Series Manual

Your Phone
New and Changed Features for Firmware Release 10.4(1)SR1
Revision
Added Multicast paging support
New and Changed Features for Firmware Release 10.4(1)
Revision
Added Problem Reporting Tool support
Added Speed-Dial support on a line key
Added Key Expansion Module support
Added Provisioning Authority support
Added Busy Lamp Field support
Updated Call Park support

Phone Setup

Typically, your administrator sets up your phone and connects it to the network. If your phone is not set up
and connected, contact your administrator for instructions.
Adjust the Handset Rest
If your phone is wall-mounted or if the handset slips out of the cradle too easily, you may need to adjust the
handset rest to ensure that the receiver does not slip out of the cradle.
New and Changed Features for Firmware Release 10.4(1)SR1
Updated Section
Page a Group of Phones (Multicast Paging)
Updated Section
Configure a Speed Dial on a Line Key
Remove a Speed Dial from a Line Key
Cisco IP Phone Key Expansion Module Setup
Overview
Key Expansion Module Buttons and Hardware
Modify a Speed Dial on a Key Expansion Module
Sign into Your Extension from Another Phone, on
page 5
Sign out of Your Extension from Another Phone, on
page 6
Monitor a Coworker's Line, on page 6
Call Park
Place a Call on Hold with Call Park
Retrieve a Call on Hold with Call Park
Cisco IP Phone 8800 Series Multiplatform Phones User Guide
3