Set Up A Wi-Fi Profile From The Phone - Cisco 8800 Series User Manual

Set Up a Wi-Fi Profile from the Phone

Procedure
Step 1
Press Wi-Fi Scan.
A list of Wi-Fi networks displays.
Step 2
Press one of these options:
• Scan—to scan for networks again.
• Select—to configure the highlighted network.
Step 3 Highlight a network from the list.
Step 4
Press Select.
Step 5 Select one of the following options:
• Cancel—go back to the previous screen.
• Save—save the network with the information you input.
• Connect—connect to the selected network.
Step 6 Press Connect.
Note
Set Up a Wi-Fi Profile from the Phone
You can add maximum of four Wi-Fi profiles. You can use this profile to connect your phone to a Wi-Fi
network.
Procedure
Step 1 Press Applications
Step 2
Select Network configuration > Wi-Fi configuration > Wi-Fi profile.
Step 3 In the Wi-Fi profile screen, move to a row in the list on which you want to set up the profile.
Step 4
Press the Select button.
You can also press Options and then select Edit.
Step 5 In the Edit profile screen, set the parameters as mentioned in the Profile Parameters table.
Cisco IP Phone 8800 Series Multiplatform Phones User Guide
150
The steps above also apply if your phone loses its network connection any time after it has booted
up, and it's not connected to an Ethernet cable.
.
Settings