Logging In: Regular User Mode - Fujitsu ScanSnap N1800 Operator's Manual

6.3

Logging in: Regular User Mode

AUTION
Depending on the authentication mode and the specified user name, the following
authentication process is performed for login authentication.
For users registered in the LDAP server
Specify a user name from the user information registered with the LDAP server.
When the [Server Type] of the LDAP server is [Active Directory] or [Active
Directory Global Catalog]
User Name Format
SAM Account Name
Does not contain @
User Principal Name
Contains @
When the [Server Type] of the LDAP server is [Other LDAP Server]
User Name Format
uid
cn
For users registered in a local account
Specify a user name from the user information of the local account.
Authentication is performed with a specified user login name for a local account saved
in a scanner.
Note that the authenticated user info is also used when saving scans to a network folder.
When the scanner is turned on or restarted, automatic login without displaying the [Login]
window is possible.
Login is not possible if the Active Directory account option is "User must change
password at next logon". Contact an administrator to change a password, and then try
logging in.
Do not move or shake the scanner when it is turned on.
This may damage components in the scanner and cause data to be
lost.
Authenticate the user login name
(sAMAccountName).
Example: user
Authenticate the user login name
(userPrincipalName).
Example: user@example.com
Authenticate the user login name (uid).
Example: user
Authenticate the user login name (cn).
Example: user
304

6.3 Logging in: Regular User Mode

Authentication Process
Authentication Process