Scanner Cannot Be Turned On; Data Cannot Be Scanned Properly - Fujitsu ScanSnap N1800 Operator's Manual

■ Scanner Cannot Be Turned On

Scanner cannot be turned on.
■ Check item
Has the power button been pressed?
■ Action
Press the power button.
■ Check item
Are the AC cable and AC adapter properly connected to the scanner?
■ Action
Connect the AC cable and the AC adapter.
Disconnect AC cable from the scanner to turn off the scanner, and connect the cable again.
After turning the power off, wait for at least 10 seconds before turning the power back on
again.
If the problem persists even after taking the above mentioned actions, contact your FUJITSU
scanner dealer or an authorized FUJITSU scanner service provider.

■ Data Cannot Be Scanned Properly

Scanning does not start.
■ Check item
Has the document been loaded correctly into the ADF paper chute?
■ Action
Reload the documents into the ADF paper chute.
■ Check item
Is the top cover completely closed?
■ Action
Close the top cover completely.
■ Check item
Does the same problem occur after turning the scanner power off and back
on again, and re-logging in?
■ Action
Disconnect AC cable from the scanner to turn off the scanner, and connect the cable again. After
turning the power off, wait for at least 10 seconds before turning the power back on again.
If the problem persists even after taking the above mentioned actions, contact your FUJITSU
scanner dealer or an authorized FUJITSU scanner service provider.
454
8.3 Other Troubleshooting