Viewing The Scanners Operating Status - Fujitsu ScanSnap N1800 Operator's Manual

Network scanner
Hide thumbs Also See for ScanSnap N1800:
Table of Contents

Advertisement

5.14 Viewing the Scanners Operating Status

The operating status of the scanners can be viewed.
1. Press the [Operation Monitor] button in the Central Admin Console main
window.
The [Scanner Operation Monitor] window appears.
Press a scanner icon to show the [Scanner Details] window.
Immediately after the Central Admin Server starts up, the operating status of the
registered scanners is shown as "Unreported". In this case, the status of each
scanner will be updated when one of the following occurs:
2. To filter scanners shown in the list, specify filter conditions and press
the [Refresh List] button.
The scanners satisfying the filter conditions appear.
3. To clear all error marks
window, press the [Clear All Errors] button.
When the scanner operation monitor view consists of multiple pages, error marks
of all scanners are cleared.
A scanner is logged in/out
The scanner power is turned on, or it is resumed from standby mode
The scanner power is turned off, or it is set to standby mode

5.14 Viewing the Scanners Operating Status

shown on the [Scanner Operation Monitor]
272

Advertisement

Table of Contents
loading

Table of Contents