Restoring Central Admin Server Settings - Fujitsu ScanSnap N1800 Operator's Manual

5.17.2 Restoring Central Admin Server Settings

Central Admin Server settings that have been backed up can be restored to the Central
Admin Server.
To restore Central Admin Server settings, execute "AmRestore.exe" in the command
prompt on the computer installed with the Central Admin Server software.
Command storage location
Under the [\AmManager\Bin] folder in the installation folder of the Central Admin
Server software
Command executable format
AmRestore.exe BackupFolderName
The italic text represents variable character strings.
Return value
0
Succeeded
Other than 0
Failed
Make sure to run the AmRestore.exe command after changing the current directory
to the [Bin] folder in the installation folder of the Central Admin Server software.
The language for the backup and restore Central Admin Servers must be the same.
If languages are different, the Central Admin Server may not operate correctly when
restoring.
The admin password is not backed up and restored by using the AmBackup.exe
and AmRestore.exe commands. Even if the AmRestore.exe command is executed,
the admin password is not changed.
For Windows Server 2008, to use HTTPS for communication to a scanner, or
computer installed with the Central Admin Console, additional settings may be
required for the target Central Admin Server to be restored. For more details, refer
to "Importing the Certificate" (page 235).
281