Checking For Updates At Scanner Startup; Requesting E-Mail Notification When A New Update Is Available - Fujitsu ScanSnap N1800 Operator's Manual

■ Checking for Updates at Scanner Startup

You can set the function for automatically checking for updates each time the scanner is
started.
1. Select [Monitoring & Management]
The [System Update] window appears.
2. Select the [Check for updates at scanner startup.] check box.
■ Requesting e-Mail Notification When a New Update is
Available
The administrator can set to receive an e-mail notification if a new update is released.
1. Select [Monitoring & Management]
The [System Update] window appears.
2. Select the [Check for updates at scanner startup.] check box.
3. Select the [Request e-mail notification when a new update is released]
check box.
When a new update is released, an e-mail entitled "Update notification" is sent to
the e-mail address that is set in the [Alert Notification] window. For details about
the e-mail address settings for alert notification, refer to
Destination for Alert Notifications" (page
[Maintenance]
[Maintenance]
191).
185
[System Update].
[System Update].
"4.16.6 Setting the